How To Winterize An Electric And Gas Pressure Washer
October 11, 2019
by Cleaning World Pressure Washing
It’s time to winterize your pressure washer if the summer season is ending. If you do not prepare it, freezing temperature levels can do a number on your pressure washer. You might find your pressure washer is tough to begin in the spring– or does not start at all.
Why Is This Process Important?
Lots of people do not go to the difficulty of winterizing their pressure washing. If it’s going to freeze outdoors or if they aren’t going to use their pressure washer for a month, they simply put it away in the garage. This can do severe damage to your pressure washer, possibly breaking it.
We believe that lots of folks who complain that their mid-range pressure washer didn’t make it past a year allowed the pressure washer to freeze up over the winter season. Hence, they broke it, to no fault of the maker.
It’s crucial to understand what issues you may trigger if you do not winterize your pressure washer. That method, you’ll understand the value of winterizing your pressure washer. Plus, you’ll understand which issues you can blame the producer for.
How To Winterize An Electric Pressure Washer?
Electric pressure washers are simpler to winterize than gas pressure washers. You just need to secure the pump and not the fuel tank. Simply follow these basic actions:
- Get a pail of clean water and place the pressure washer’s injection tube into the pail. If your design does not have an injection tube, where you include a cleaning agent, then just put the water into the cleaning agent inlet.
- Run the pressure washer for 2 minutes at low pressure. By doing so, you wash out the pump and lines, getting rid of the cleaning agent.
- Switch off your garden pipe. Detach your pressure washer from your hose pipe. Spray the lance to get rid of any pressure.
- Next, get rid of the lance, pipe, and any dry accessories that can be eliminated.
- Turn the pressure washer back on and shake it carefully, attempting to get rid of any excess water. Just do so if your pressure washer is little enough that it’s safe to rise.
- Turn the pressure washer off and pull the recoil deal with to get rid of more water.
- Through the garden pipe inlet, gather pump saver.
- Now your electric pressure washer is winterized and all set to be kept. Make sure to keep it in a safe place where kids and animals can’t access it. For more pointers on how to keep it, check out the storage area listed below.
How To Winterize A Gas Pressure Washer?
To winterize a gas pressure washer, you need to follow a couple of more actions than you would with an electrical pressure washer because you want to protect the fuel. Here’s how you can winterize your gas pressure washer:
- Put gas stabilizer into the fuel tank to secure your fuel and engine elements over the winter season. The stabilizer does require to be flowed through the engine by running the pressure washer for a bit. Do not do it simply.
- You also need to get rid of the cleaning agent from the pump, which you achieve by running clean water through the cleaning agent tank. You can include clean water to the tank by putting it in. Or, if your gas pressure water has an inlet tube, put the hose pipe in a container of clean water.
- Now run the pressure washer for 2 minutes, on low pressure. You’ll be distributing the gas stabilizer and clearing out the cleaning agent at the same time. A lot of guides have you do these actions independently. However, it’s simply a wild-goose chase.
- Switch off your pressure washer and detach it from your tube.
- Spray the deal with to launch any pressure.
- Get rid of the hose pipe, lance, and any other dry accessories.
- Put the pump saver into the pressure washer through the hose pipe inlet.
- Now your gas pressure washer is winterized and all set to be kept.