Pressure Washing Your Home – Do It Before Selling Your House

Pressure Washing Your Home – Do It Before Selling Your House


As the old saying goes, you only have one chance to make a great first impression. This is true every time you meet new people and even when you visit or view a house for sale. The home’s exterior is the very first thing potential buyers see and notice the moment they drive up. The curb appeal of your property always matters with a significant impact on your home’s resale potential.

You need to take some time to pressure wash your house as this will help boost the number of potential homebuyers. Of course, you wouldn’t want your buyers to view your house for sale with its dirty siding, fences, mud cakes, and sidewalks covered with algae. Can you expect them to stop and take a look around your home? Probably not. But, a house with a clean driveway, well-maintained fencing, and looks like it got a fresh coat of paint will likely grab the interest of more potential buyers.

A thorough and expert professional pressure washing of your house before selling it can improve its curb appeal and maintain its appearance. Proper pressure washing can help you sell your house faster.

Why Pressure Wash Your House

There are various parts of your house that can take advantage of professional pressure washing. You can get rid of the grime that gathered on the shady corner of your house. You might have algae or mold growth on the parts of your house that doesn’t get much sun. It is usually the case when the weather is damp. Debris may also accumulate even on the sunny corner.

Dirt and dust collect on cement, wood, and stucco. Your whole house might only require a proper pressure wash for better curb appeal. Professional pressure washing companies will help you bring back life to tired and dull-looking surfaces and make your home’s paint job look fresh all over again.

Steps, pathways, and driveways can also benefit from expert pressure washing. Mold and dirt can grow in cracks and corners in cement driveways and steps. High-pressure washing can get rid of this debris.

Fences, pool areas, and decks will also enjoy a much-improved appearance thanks to pressure washing. The mold and dirt is going to be washed away from cement and wood surfaces. Paving stones and bricks will also look clean and bright. Pressure washing is also the most feasible option to eliminate dirt from the grout.

Soft Wash Your Roofs

The soft washing method with extremely light pressure uses effective and safe chemicals that can be used on shingle and tile roofs to get rid of dirt without causing harm to the roofing materials. It can give your old roof a much fresher look.

Pressure washing equipment features several nozzles and speeds that can be used for controlling the water force on various types of surfaces. It can protect the surface while getting rid of dirt. Professional pressure washing companies make use of the right equipment and technique to get things done.

How To Winterize An Electric And Gas Pressure Washer

by Cleaning World Pressure Washing

It’s time to winterize your pressure washer if the summer season is ending. If you do not prepare it, freezing temperature levels can do a number on your pressure washer. You might find your pressure washer is tough to begin in the spring– or does not start at all.

Why Is This Process Important?

Lots of people do not go to the difficulty of winterizing their pressure washing. If it’s going to freeze outdoors or if they aren’t going to use their pressure washer for a month, they simply put it away in the garage. This can do severe damage to your pressure washer, possibly breaking it.

We believe that lots of folks who complain that their mid-range pressure washer didn’t make it past a year allowed the pressure washer to freeze up over the winter season. Hence, they broke it, to no fault of the maker.

It’s crucial to understand what issues you may trigger if you do not winterize your pressure washer. That method, you’ll understand the value of winterizing your pressure washer. Plus, you’ll understand which issues you can blame the producer for.

How To Winterize An Electric Pressure Washer?

Electric pressure washers are simpler to winterize than gas pressure washers. You just need to secure the pump and not the fuel tank. Simply follow these basic actions:

  • Get a pail of clean water and place the pressure washer’s injection tube into the pail. If your design does not have an injection tube, where you include a cleaning agent, then just put the water into the cleaning agent inlet.
  • Run the pressure washer for 2 minutes at low pressure. By doing so, you wash out the pump and lines, getting rid of the cleaning agent.
  • Switch off your garden pipe. Detach your pressure washer from your hose pipe. Spray the lance to get rid of any pressure.
  • Next, get rid of the lance, pipe, and any dry accessories that can be eliminated.
  • Turn the pressure washer back on and shake it carefully, attempting to get rid of any excess water. Just do so if your pressure washer is little enough that it’s safe to rise.
  • Turn the pressure washer off and pull the recoil deal with to get rid of more water.
  • Through the garden pipe inlet, gather pump saver.
  • Now your electric pressure washer is winterized and all set to be kept. Make sure to keep it in a safe place where kids and animals can’t access it. For more pointers on how to keep it, check out the storage area listed below.

How To Winterize A Gas Pressure Washer?

To winterize a gas pressure washer, you need to follow a couple of more actions than you would with an electrical pressure washer because you want to protect the fuel. Here’s how you can winterize your gas pressure washer:

  • Put gas stabilizer into the fuel tank to secure your fuel and engine elements over the winter season. The stabilizer does require to be flowed through the engine by running the pressure washer for a bit. Do not do it simply.
  • You also need to get rid of the cleaning agent from the pump, which you achieve by running clean water through the cleaning agent tank. You can include clean water to the tank by putting it in. Or, if your gas pressure water has an inlet tube, put the hose pipe in a container of clean water.
  • Now run the pressure washer for 2 minutes, on low pressure. You’ll be distributing the gas stabilizer and clearing out the cleaning agent at the same time. A lot of guides have you do these actions independently. However, it’s simply a wild-goose chase.
  • Switch off your pressure washer and detach it from your tube.
  • Spray the deal with to launch any pressure.
  • Get rid of the hose pipe, lance, and any other dry accessories.
  • Put the pump saver into the pressure washer through the hose pipe inlet.
  • Now your gas pressure washer is winterized and all set to be kept.

Significant Signs It’s Time for a Pressure Wash

Significant Signs It’s Time for a Pressure Wash

Taking care of your house does not have to imply investing in pricey repair work or making significant remodeling. Check out to analyzing your house for signs whether it’s time for a pressure wash.

Staining on your roofing system

A roofing system can state so much about a home, the number of storms it’s weathered, the number of repair work it’s continual, and the number of years it’s been a house. Using and dripping down are significant signs it’s time for your roofing system to be fixed and staining suggests that it’s time for it to be pressure cleaned.

If you see black marks along your roofing, do not compose them off as staining from plants or dirt. Capturing it in time indicates preventing thousands of dollars’ worth of repair work; a pressure wash is all you’ll need to get your roofing back into fantastic shape.

View your energy costs

Extraordinarily enough, among the most effective signs it’s time for a pressure wash will not come straight from your home. If your energy expense is unusually high, and your roofing system and windows reveal no signs of repair work, it’s most likely due to the fact that your house’s exterior is loaded with dirt or snow.

Your driveway does not look good

Filthy driveways do not make an excellent first impression on visitors, however, more, they can grow mold over time. Pressure cleaning your driveway frequently isn’t simply a visual option, it’s a security arrangement.

You’re seeking to repaint

It’s absolutely time to think about a pressure wash if you’re looking to repaint the exterior of your house. Paint is most likely to be unequal or irregular without a pressure wash, given that even the greatest quality paints have trouble adhering to and covering dirt. To ensure your house’s color is magnificently dynamic and even, think about pressure cleaning prior to breaking out your coveralls.

When the time comes, your home will show foolproof signs it’s time for a pressure wash. To get a complimentary quote for a pressure wash for your house, do not be reluctant to.

Your Energy Expense

Energy is the only product that we select to purchase every day without understanding precisely what it costs till a month later on. When your house’s heating or cooling expenses increase greatly over a brief time, that can be an indication that your house requires brand-new siding.

Heating or cooling expenses that do not fall in line with those of your next-door neighbors, is a glaring indicator that something is seriously incorrect with a house’s outside wall insulation. Harmed or improperly carrying out siding can be a substantial cause for fan the leading heating & cooling expenses.


The function of joint sealant is to reduce water wicking through completion grain of the wood. Siding ought to be caulked at all vertical joints and joints.

With time, caulk can diminish, fracture, or gradually deteriorate. Your siding system will stop working if joints have actually moved and boards look irregular. If it is caulked properly, your siding ought to look practically smooth (with no vertical lines at the butt joints).